Between the liquid used to in the process of storage and processing is an expensive and headache thing. Liquid spray not only more pay cleanup, and waste liquid, and at the same time, the liquid processing not only needs a number of additional equipment, and can lead to inappropriate treatment liquid liquid physical injury and fire, this could lead to high cost of insurance. In Rock Falls, I11 IFH Group Inc. (www.ifhgroup.com) is a good solution for the problems. The company developed a centralized, water type liquid storage and dose system, has a mobile liquid cart completely solved the process of transportation problem. Contains a lot of nominal 65 gallons of the container, fixed on a shelf, each container has a leading and drip tray. "Due to the customer demand is diverse, so our system also provides various products." , IFH Group's chief operating officer said. "For example, customers want very standard unit without selective; while needs the security of the whole system equipment manufacturing company, is usually the insurance company require to do so; most of the industrial customers can customize container plate around the system unit. We have all of the container plate production more than the EPA standard 40 CFR 256.175 splash of the liquid storage container system specified requirements."
The IFH storage and dose system has 8 65 gallons of memory and a splash plate and pump timer.
The standard container system must have enough capacity to accommodate all storage container for 10% of the total volume or the largest container volume, with larger values. For example, a contains four 65 gallon container IFH system - two wide and two high - can hold 260 gallons of liquid, with a splash of container capacity of 90 gallons, 25 gallons more than EPA regulations. Greater has 16 storage container -- four high and four broad, can accommodate 1040 gallons of liquid, with a splash of container capacity of 180 gallons, than EPA regulations 76 gallons
65 gallons of empty container capacity means that in the upper barrel before 55 gallon bucket of products all can be pulled out. This reduces switching DaiGong time caused by pump. And the empty barrel can be immediately returned to avoid deposition.
Liquid level meter and the number of gallons used by each system off can be intuitive see remnant liquid quantity in each container, make it easier to inventory control. Using IFH system, factory don't need to always save extra liquid barrels, are more reserved because they are not sure how much liquid left in the pail. Every 65 gallon container with a bend to mitigate product flow and protect the main container. The bent pipe is easy to upgrade and customization with desiccant breather can avoid such as moisture and particulate impurities. Fast connection filtering component from 55 gallon barrels can be any one of container transportation of liquid filter.
System with a positive displacement, self-priming pump system can save time when injection liquid and clear, make the barrels from liquid to the system after transmission liquid cleaning work fast and simple. When need to supplement system of liquid, placing a 55 gallon bucket against the system, and use a hose connected to the pump into the barrel. Pump and hose from the barrel of liquid in the vacuum suction system. Usually pump will leave a few gallons of liquid at the bottom of the barrel. To the same liquid pump discharge side of the flow of tap. Due to the pump have a timer so without operator intervention, just know that fit a bucket need how much time you can set the timer in the barrel is to shut down the pump motor, and the staff can do other things.
All of measurement taps and containers are unified with product name tags, to reduce the chance of using the wrong products. Self closing tap to ensure that in from the system according to dose not confused or waste liquid. The storage of large size system is very expensive, allowing fluid system with the development of the company and the extension.
The factory will find a centralized system can save the land of the factory. 9 55 gallon barrels, for example, a total of 495 gallons, occupy 120 square feet, and a nine container liquid storage measurement system, a total of 585 gallons, takes up 19 square feet, can save 101 square inches. And liquid transportation cost can save about 80%, because of liquid storage system is very close distance from work area. Many large manufacturers to use multiple small system, distribution within the plant can save transportation time and costs.
Factory to seek diversified liquid transportation method, and can be integrated the advantages of efficient centralized storage and portable measurement system.